2019 VOLKSWAGEN TIGUAN 2.0T SE/2.0T SEL/2.0T SEL R-LINE/2.0T SEL R-LINE BLACK VIN 3VV2B7AX8KM128558

The Volkswagen Tiguan 2.0T described here left the factory in 2019. The fuel is petrol. The drivetrain combines an automatic gearbox with all-wheel drive. The specification is taken from the source data.

The recorded mileage is 87,267 miles. Because the clock counts miles, any figure noted in kilometres has to be converted before the two can be compared. Gaps of several years between logged figures deserve attention, as does any reading lower than the one before it. Title paperwork often notes the mileage at each change of owner, which makes it a useful cross-check.

The main issue noted for this car is damage to the left side. A damage entry is a starting point for the inspection, telling the mechanic where to look first. Damage rarely stays where it is first seen: an impact can reach the mountings and airbags behind a panel, and water or fire the wiring and electronics.

A ‘runs and drives’ note means the car moved under its own power when it was checked. A key was noted with the car. Condition notes are a snapshot: the car may have been worked on, stripped of parts or left standing since.

The car carries a salvage title. Titles of this type are issued to cars declared a total loss. A branded title follows the car through every change of owner, so it remains part of its history.

A car’s history answers three questions: who kept it, how it was looked after and what went wrong along the way. No single office holds the whole story of a car: registries, workshops, insurance companies and lenders each keep their own part. What a car has been through is seldom visible at first glance, and a respray can make even a badly damaged car look sound.

For the engine, the service history matters most: oil changes, filters and the timing belt or chain are the entries to look for. Many modern petrol engines are turbocharged and direct-injected; where they are, the turbocharger and injectors belong on a specialist’s checklist. Automatic transmissions, CVTs included, are expensive to repair, so the test drive should include pulling away from a standstill and a stretch at motorway speed. A car with all-wheel drive has extra differentials and often a transfer case, which an inspection should cover alongside the engine and gearbox.

The VIN is a 17-character code assigned at the factory: it identifies the manufacturer, the model and its variant, and ends with a serial number unique to the car. The record gives the VIN as 3VV2B7AX8KM128558. The number in the car’s documents should match the one stamped into the body and the one on the plate at the base of the windscreen.

Depending on what is on file, a VIN report may include past registrations, mileage readings, damage entries, branded titles and theft checks. Paperwork is only as complete as the people who kept it, so a report with few entries lowers the risk without removing it. A professional inspection makes sense whatever the paperwork shows, because no report measures corrosion, worn bushes or a poor repair. The next step is to look up the history behind VIN 3VV2B7AX8KM128558.