2018 SUBARU IMPREZA 2.0I VIN 4S3GTAA66J3701740

The Subaru Impreza 2.0I described here left the factory in 2018. The gearbox is continuously variable (CVT). Under the bonnet is a 2.0-litre petrol engine producing 152 hp. The specification is taken from the source data.

The car was recorded with 132,192 miles on the clock. The instruments count in miles; the same distance in kilometres is about 1.6 times the figure. High mileage alone does not rule a car out; what matters is whether regular servicing kept pace with it. The number on the clock proves little by itself; earlier figures logged at services and inspections are what make it believable. Title paperwork often notes the mileage at each change of owner, which makes it a useful cross-check.

This Subaru Impreza 2.0I is recorded with flood damage. A damage entry is a starting point for the inspection, telling the mechanic where to look first. Some damage shows its consequences only later: corroded connectors and electrical faults can surface months afterwards.

A note in the source data says the car did not run. An engine that will not start could have a simple electrical fault or internal damage, and only diagnostic work can tell which. A key was noted with the car. A condition note describes the car at one moment; months of standing or later work on the car can change the picture in either direction.

According to the source data, the car has a salvage title. A title of this kind usually means the car was written off as a total loss after damage. If any work has been done on the car since, photos and invoices should show what was replaced.

Behind every used car lies a string of events: who owned it and for how long, what the inspections found and which repairs and claims were made. The paperwork is kept by different bodies – registries, workshops, insurance companies and lenders – so the history of one car is spread across many places. What a car has been through is seldom visible at first glance, and a respray can make even a badly damaged car look sound.

Many modern petrol engines are turbocharged and direct-injected; where they are, the turbocharger and injectors belong on a specialist’s checklist. While the car does not run, stored fault codes and a look at the fluid are the only early evidence of how the CVT gearbox has fared. A car with all-wheel drive has extra differentials and often a transfer case, which an inspection should cover alongside the engine and gearbox.

A VIN never contains the letters I, O or Q, which could be mistaken for digits; its 17 characters identify the maker, the model and the individual car. For this car, the VIN is 4S3GTAA66J3701740. The VIN usually appears at the base of the windscreen, on a door pillar and stamped into the body, and all of them should match the documents.

Where entries exist, a VIN check can show changes of owner, past mileage readings, reported damage and whether the car is listed as stolen. The absence of an entry is not proof that nothing happened; it may only mean that nobody wrote it down. A VIN check and a physical inspection answer different questions: the first says what happened to the car, the second what condition it is in now. For this 2018 Subaru Impreza 2.0I, the sensible next step is a history check on VIN 4S3GTAA66J3701740.